X-Rays; Temperature - Loma X5c Operating Instructions Manual

GOTO
 Grey - A grey coloured panel indicates that the item is inactive, which does not
indicate a fault as no signal is expected.

X-Rays

X-Ray information is displayed by tapping X-Rays in the
screen.
The current status of a number of key X-Ray parameters is displayed in the X-Rays area.
The X-Rays area contains a list of key X-Ray parameters and displays the current status of
each one via a coloured panel:
 Green - A green coloured panel indicates that the parameter value is within specified
limits.
 Red - A red coloured panel indicates a problem with a parameter value which must
be investigated and resolved.
 Grey - Grey panels for all panels indicates that X-Rays are not being generated.

Temperature

Temperature information is displayed by tapping Temperature in the
Diagnostics screen.
The current status of the Tank, Heater and Cabinet Cooler are displayed in the Temperature
area.
The Temperature area displays the current temperature status for the Tank, Heater and
Cabinet Cooler via a coloured panel:
 Green - A green coloured panel indicates that the component is operating within its
specified temperature range.
 Red - A red coloured panel indicates that the component temperature is operating
outside of its specified temperature range and investigation is required to resolve the
problem.
Original Document
X-Ray Set tab of the
X-Ray Set
Copyright © 2017 Loma Systems
45
Diagnostics
tab of the