Inspection - Loma X5c Operating Instructions Manual

40

These numbers will typically add up to more than the total number of
contaminated rejects since a pack may fail more than one contaminant
inspection tool.
Product Integrity - This area displays the following totals data:

 Product Integrity - The total number of packs rejected for failing product
integrity inspection is displayed.

Inspection

The Inspection sub-tab of the Totals tab provides inspection times and dates and totals
covering pack processing times
The Inspection sub-tab provides the following:
 Inspection - This area displays the following inspection information:
 Date Last Run - The date and time that the system was last run is displayed.
 Last Inspection - The date and time that the last pack was inspected is
displayed.
 Last Results - The result of the last inspection,
 Process Times - This area displays the following totals data:
 Packs - The total number of packs inspected is displayed.
 Process Time (ms) - The total time in milliseconds taken to process all the
packs is displayed. It is important to monitor this value when the conveyor is
Document Number: 814212-2.0-ENG
Explorer - The total number of packs rejected against the Basic 1
inspection tool parameters is displayed.
PASS or FAIL, is displayed.
Original Document
GOTO