Safety Guards; Responsibilities And Disclaimer - Loma X5c Operating Instructions Manual

Safety First

Safety Guards

Guarding
For Loma X-Ray Inspection Systems the use of guarding, including covers, panels, curtains
and other methods is extremely important in order to restrict operators from accessing areas
of the machine that are potentially hazardous whilst the machine is operating.
Interlock switches
On some machines, access hatches are incorporated into the guards to provide access to
some areas of the machine to, for example, clear obstructions and remove products when
required. These hatches are fitted with an interlock switch so that when a hatch is opened,
the machine will switch off and a fault condition generated.
Safety Relay and Circuits
As safety is paramount, at least one fail safe relay is fitted to ensure that if a contact of the
interlocks were to fail the safety relay will automatically detect the fault and therefore switch
off the system and generate a fault condition.

Responsibilities and Disclaimer

Unless agreed otherwise in writing by Loma Systems, any warranty claims are subject to the
following:-
 No unapproved changes or additions to the electrical wiring system have been
carried out.
 No unapproved mechanical changes or additions to the system have been carried
out.
 No unapproved electronic changes or additions to the system have been carried
out.
 No unapproved changes or additions to the system software have been carried out.
 Cleaning of the system has been carried out in accordance with the
Cleaning guidance
 The system has not been subjected to operation, or an environment, that is outside of
the parameters included in the machine's Technical Specification.
 The system has only been used for the purpose for which it has been sold, as specified
in the contract.
 Maintenance
included in this User Guide.
 Any spare parts required may be obtained from Loma Systems by sending an email
to sales@loma.com.
Original Document
included in this User Guide.
tasks have been carried out in accordance with the guidance
Inspection and
Copyright © 2017 Loma Systems
13