Introduction - Loma X5c Operating Instructions Manual

Introduction

X-Ray inspection systems are fast becoming a common fixture in food processing and
packaging plants throughout the world. Loma Systems has been designing and
manufacturing inspection equipment for over 45 years and has earned a reputation for
consistent quality and advance technology.
The following sections provide more information:
About this Guide
This section provides you with a general introduction to the guide, its purpose and the
intended audience.
Organisation
The guide is organised into a number of chapters providing information in a logical
sequence.
Document Change Control
This guide is a controlled document which is subject to change in line with changes to our
products. As the principle aim of the guide is to provide you with the information that you
need, we would welcome any comments or feedback that will enable us to make
improvements to the guide.
Document Key
Special text is used throughout the document, highlighted through the use of icons, to add
notes and warnings where appropriate.
Copyright and Acknowledgements
This guide is copyright to Loma Systems. No part of this document may be reproduced,
transmitted, transcribed, stored in a retrieval system, translated into any language, or
computer language in any form or by any means without the prior written permission of
Loma Systems.
Loma Systems
Loma has offices around the world that can provide you with sales and support services. This
section includes the address and contact details for the main offices. In addition details for
all offices are available via the website at www.loma.com.