Loma X5c Operating Instructions Manual page 57

Operating Instructions
Learning Stage
Once the default product settings have been made in the Set Product
Parameters screen, the values and options selected are then used by the system
to perform calibrations and set the required system power levels. Once
completed you will be advised to Please Pass Sample Pack Now....
An arrow image is displayed to the right of the area, indicating the direction of
the product pack though the system. The time remaining to learn the product is
displayed on the screen.
Add Time - This button is displayed to the right of the Status area and the
time in seconds remaining for you to pass the first pack through the system is
displayed next to it. The default time provided is 20 seconds.
To increase the duration of the learn product process.
Final Stage
Once the Learn product process is complete the Instructions field is updated.
Tap on the Exit button to close the screen and display the
Original Document
1. Tap to increase the time remaining by ten seconds
You can repeat this up to a maximum of 99 seconds.
This provides you with additional time to prepare and pass the
product pack through the system. The timer resets and starts
counting down again from 20 seconds after each pack has been
detected by the system.
Main Run
Copyright © 2017 Loma Systems
53
screen.