Chapter 2. Setup; Unpacking; Setting Up The Quickscan™ Qd2590 Reader - Datalogic QuickScan QD2590 Product Reference Manual

CHAPTER 2
SETUP

UNPACKING

Check carefully to ensure the reader and any cables or accessories ordered are present
and undamaged. If any damage occurred during shipment, contact "
on page xii
SETTING UP THE QUICKSCAN™ QD2590 READER
Follow the steps provided in this section to connect and get your reader up and commu-
nicating with its host:
1. Connect the Interface Cable to the reader as shown in Figure 2. To disconnect the
2. Connect the other end to the Host (see the next section, "
3. Modify "
.
cable, insert a paper clip or similar object into the opening shown.
and Figure 3).
on page 4
Customizing Configuration Settings" on page 15
needed from factory settings).
Technical Support"
Connect Host Interface"
(only if modifications are
PRODUCT REFERENCE GUIDE
3