Plessey Set Length 1; Plessey Set Length 2 - Datalogic QuickScan QD2590 Product Reference Manual

PLESSEY

Plessey Set Length 1

This feature specifies one of the bar code lengths for "
. Length 1 is the minimum label length if in Variable Length Mode, or the first fixed
184
length if in Fixed Length Mode. The length includes the bar code's check and data char-
acters.
The length can be set from 1 to 50 characters. See "
detailed programming instructions.
Select Plessey Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.

Plessey Set Length 2

This feature specifies one of the bar code lengths for "
. Length 2 is the maximum label length if in Variable Length Mode, or the second
184
fixed length if in Fixed Length Mode. The length includes the bar code's check and data
characters.
Length can be set from 1 to 50 characters. A setting of 00 specifies to ignore this length
(only one fixed length). See "
instructions.
Select Plessey Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
$CPLL1

Length 1 = 01 (one character)
$CPLL2

Length 2 = 50 (50 characters)
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.
Set Length 2" on page 250
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.
ENTER/EXIT PROGRAMMING MODE
Plessey Length Control" on page
Set Length 1" on page 249
Appendix D, Keypad represent-
CANCEL
Plessey Length Control" on page
for more detailed programming
Appendix D, Keypad represent-
CANCEL
PRODUCT REFERENCE GUIDE
for more
185