Global Interface Features; Host Commands - Obey/Ignore; Usb Suspend Mode - Datalogic QuickScan QD2590 Product Reference Manual

ENTER/EXIT PROGRAMMING MODE
The following interface features are configurable by all interface types.
To set features specific to your interface, turn to that section of this manual.
Host Commands — Obey/Ignore
This option specifies whether the reader will obey or ignore host commands. When set
to ignore, the reader will ignore all host commands except those necessary for:
•
•
•
•
$CIFIH00
Host Commands = Ignore

USB Suspend Mode

This setting enables/disables the ability of USB interfaces to enter suspend mode.
$CUSSE00
USB Suspend Mode = Enable
20
QUICKSCAN™ QD2590

GLOBAL INTERFACE FEATURES

service mode
flash programming mode
keeping the interface active
transmission of labels.

Host Commands = Obey
(Do Not Ignore Host Commands)
$CIFIH01

USB Suspend Mode = Disable
$CUSSE01