Illuminator Intensity - Datalogic QuickScan QD2590 Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

Illuminator Intensity

With the following settings the illumination intensity can modified if needed.
$CLADI00
Set Illumination Intensity Level = Mid-Low
$CLADI02
Set Illumination Intensity Level = Mid-High
$CLADI04
96
QUICKSCAN™ QD2590
NOTE: Increasing the Illuminator intensity level may reduce the overall
reading performances.
Set Illumination Intensity Level = Low
$CLADI01
Set Illumination Intensity Level = Mid
$CLADI03

Set Illumination Intensity Level = High
READING PARAMETERS