Industrial 2 Of 5 Set Length 1; Industrial 2 Of 5 Set Length 2 - Datalogic QuickScan QD2590 Product Reference Manual

INDUSTRIAL 2 OF 5

Industrial 2 of 5 Set Length 1

This feature specifies one of the bar code lengths for "
page 158
fixed length if in Fixed Length Mode. The length includes the bar code's check and data
characters.
The length can be set from 1 to 50 characters. See "
detailed programming instructions.
Select Industrial 2 of 5 Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.

Industrial 2 of 5 Set Length 2

This feature specifies one of the bar code lengths for "
page 158
ond fixed length if in Fixed Length Mode. The length includes the bar code's check and
data characters.
The length can be set from 1 to 50 characters. A setting of 00 specifies to ignore this
length (only one fixed length). See "
gramming instructions.
Select Industrial 2 of 5 Set Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
. Length 1 is the minimum label length if in Variable Length Mode, or the first
$CU2L1

Length 1 = 06 (6 characters)
. Length 2 is the maximum label length if in Variable Length Mode, or the sec-
$CU2L2

Length 2 = 50 (50 characters)
ENTER/EXIT PROGRAMMING MODE
Industrial 2 of 5 Length Control" on
Set Length 1" on page 249
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in Appendix D, Keypad
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.
CANCEL
Industrial 2 of 5 Length Control" on
Set Length 2" on page 250
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in Appendix D, Keypad
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.
CANCEL
for more
represent-
for more detailed pro-
represent-
PRODUCT REFERENCE GUIDE
159