Maxicode Set Length 2 - Datalogic QuickScan QD2590 Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

Maxicode Set Length 2

This feature specifies one of the bar code lengths for "
. Length 2 is the maximum label length if in Variable Length Mode, or the second
203
fixed length if in Fixed Length Mode. Characters can be set from 0001 to 0145 characters
in increments of 0001 (pad with zeroes).
See "
Select Maxicode Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
204
QUICKSCAN™ QD2590
Set Length 2" on page 250
$CMXL2

Length 2 is 0145 Characters
for detailed instructions on setting this feature.
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.
2D SYMBOLOGIES
Maxicode Length Control" on page
Appendix D, Keypad represent-
CANCEL