Gs1 Databar Expanded Set Length 2 - Datalogic QuickScan QD2590 Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

GS1 DataBar Expanded Set Length 2

This feature specifies one of the bar code lengths for "
Control" on page 121
or the second fixed length if in Fixed Length Mode. Length includes the bar code's data
characters only.
The length can be set from 1 to 74 characters. A setting of 00 specifies to ignore this
length (only one fixed length). See "
gramming instructions.
Select GS1 DataBar Expanded Set Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
122
QUICKSCAN™ QD2590
. Length 2 is the maximum label length if in Variable Length Mode,
$CXBL2

Length 2 = 74 (74 characters)
GS1 DataBar Expanded Length
Set Length 2" on page 250
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in Appendix D, Keypad
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.
CANCEL
1D SYMBOLOGIES
for more detailed pro-
represent-