B - INSTRUCTIONS D'EMPLOI
INSTRUCTIONS FOR USE
8. LISTING DES PARAMETRES SUR IMPRIMANTE
LISTING OF PARAMETERS ON PRINTER
L'appui sur la touche
imprimante série connectée à l'arrière du générateur sur
la prise 25 broches standard.
Les informations envoyées à l'imprimante sont :
a) la liste des paramètres de configuration du
générateur.
b) les procédé, cycle de soudage et mode de
réglage sélectionnés sur le n° de programme
courant.
c) la liste des paramètres de soudage.
Nota : le protocole de la liaison série est le suivant :
❐ 1200 bauds
❐ 8 bits
❐ sans parité
❐ 1 bit de stop.
- 48
B
permet de piloter une
Pressing key
controls a serial printer connected to
the standard 25-pin socket on the rear of the power
source.
The information sent to the printer is the following:
a) list of power source configuration parameters
b) processes, welding cycle and setting mode
selected on the present program number.
c) list of welding parameters.
Note: the serial link protocol is the following:
❐ 1200 bauds
❐ 8 bits
❐ no parity
❐ 1 stop bit.
330 / 480
SAFMIG
TRS