Prédispositions En Usine; Factory Settings; Precision Des Afficheurs; Displays Informations - Air Liquide SAFMIG 330 TRS PLUS Safety Instruction For Use And Maintenance

Table of Contents

Advertisement

10. PREDISPOSITIONS EN USINE

FACTORY SETTINGS

Les paramètres du mode programmation de soudage
sont prédéfinis comme suit pour tous les numéros de
programmes :
■ COUPLE FIL/GAZ
(Acier sous Atal 5 en ∅1,2mm)
■ PROCEDE = MIG PULSE
■ CYCLE = 2 TEMPS
■ SYNERGIE MONO-BOUTON
■ SANS EVANOUISSEMENT
■ LONGUEUR D'ARC = 0,0
TENSION D'ARC = 25,0V
■ VITESSE DE FIL = 5,0m/mn
■ TEMPORISATIONS : PRE-GAZ = 0,0s ;
POST-GAZ = 0,5s ; ANTI-COLLAGE = 0,08s.

11. PRECISION DES AFFICHEURS

DISPLAYS INFORMATIONS

■ Affichage de la vitesse de dévidage de fil :
± 2 % résolution ± 1 digit
■ Mesure du courant moyen de soudage :
± 2 A
■ Mesure de la tension moyenne de soudage :
± 0,2 V résolution ± 2 digits
Nota : les appareils de mesures ou afficheurs de
tension, intensité, vitesse de fil... qu'ils soient
analogiques ou digitaux doivent être considérés
comme des indicateurs et non comme des
instruments de contrôle. Par conséquent, il ne sera
pas délivré, en standard, de certificat d'étalonnage.
330 / 480
SAFMIG
TRS
0
1
1
résolution ± 2 digits
The welding programming mode parameters are
predefined as follows for all program numbers:
■ WIRE/GAS COMBINATION
(Steel in Atal with ∅ 1.2mm)
■ PROCESS = PULSED MIG
■ CYCLE = 2 T
(Trigger held pressed during welding)
■ SINGLE-BUTTON SYNERGY
■ NO SLOPING DOWN
■ ARC LENGTH = 0.0, ARC VOLTAGE = 25.0V
■ WIRE SPEED = 5.0 m/min
■ TIMEOUTS: PREGAS = 0.0s;
POST GAS = 0.5s; ANTISTICK = 0.08s.
■ Display of wire feed speed :
± 2 % resolution ± 1 digit
■ Average welding current measurement :
± 2 A
■ Average welding voltage measurement :
± 0.2 V resolution ± 2 digits
Note : the measuring tools or indicators for voltage,
intensity and wire speed... either analog or digital,
must be considered as indicators and not as control
tools. Consequently, there will be not calibration
certificate delivered.
A - INFORMATIONS GENERALES
GENERAL INFORMATIONS
0
1
1
resolution ± 2 digits
- 31
A

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Safmig 480 trs plus

Table of Contents