Power Supply - Kodak DirectView CR 825 Theory Manual

THEORY GUIDE
10DEC05

POWER SUPPLY

TG4825-1
Page
The CR 825/850 SYSTEM operates correctly when connected to the power sources
106 of 120
described in the table below. These voltages can be obtained from a line-and-neutral or line-
to-line connection. For all voltages, only a single-phase power distribution system is
necessary.
The input power is changed at the TRANSFORMER T1 to an output voltage of 120 V AC. No
additional FILTERS, TRANSFORMERS, or other devices are necessary to provide correct
operating voltage. Also, no procedures are necessary to set up the TRANSFORMER or
POWER SUPPLY.
Voltage
100 V AC
115 V AC
120 V AC
127 V AC
200 V AC
208 V AC
220 V AC
230 V AC
240 V AC
Tolerance Current
+10% 10 A
+10% 10 A
+10%, -13% 10 A
+10% 10 A
+10% 5 A
+10% 5 A
+10% 5 A
+10% 5 A
+10% 5 A
Frequency
50/60 Hz
50/60 Hz
50/60 Hz
50/60 Hz
50/60 Hz
50/60 Hz
50/60 Hz
50/60 Hz
50/60 Hz
Power Distribution