Kodak DirectView CR 825 Theory Manual page 104

THEORY GUIDE
10DEC05
4. The software on the INTERNAL PC that monitors the Routing_Inbox moves the processed
TG4825-1
Page images to the D:\images\Routing_Inbox directory:
104 of 120
• changes the image/patient data file to DICOM format and provides the file to the
Medical Image Manager (MIM). MIM provides all the parameters necessary to format
the file correctly for any output device on the hospital network.
• writes the image to the C:\images directory
• sends the image to the selected output devices or network nodes using the Ethernet
connection with the hospital network
• changes the image status to "PENDING" until MIM receives a message that indicates
that transmission of the image was successful. An image can remain in "Pending" for a
long time if the receiving device is slow because of high network traffic or more than
one device sending images to the same destination at the same time.
• when MIM receives a message that the transmission of the image was successful,
changes the image status to "DELIVERED"
• if a MIM failure occurs or the CR 825/850 SYSTEM is started during image
transmission, changes the status of the image to "FAILED Delivery". The operator must
send the image to the destinations again.
Logic and Control