Turning On Automatic Daylight Savings Time; Setting Tone Or Pulse Dialing Mode; Memory Storage - Brother Model MFC-5200C User Manual

Turning on Automatic Daylight Savings Time

You can set the MFC to change automatically for Daylight Savings
Time. It will reset itself forward one hour in the Spring and backward
one hour in the Fall.
1
Press Menu/Set, 1, 6.
2
Press or
Press Menu/Set.
3
Press Stop/Exit.

Setting Tone or Pulse dialing mode

Your MFC comes set for Tone dialing service (multi-frequency). If
you have Pulse dialing service (rotary), you need to change the
dialing mode.
1
Press Menu/Set, 1, 7.
2
Press
(or TONE ).
Press Menu/Set.
3
Press Stop/Exit.

Memory Storage

If there is a power failure, you will not lose your menu settings
because they are stored permanently. Temporary settings (such as
Contrast, Overseas Mode, and so on) will be lost. You may also have
to reset the date and time.
4 - 7 INITIAL SETUP
to select ON (or OFF ).
or to select PULSE
GENERAL SETUP
6.AUTO DAYLIGHT
GENERAL SETUP
7.TONE/PULSE