Programming Your Pager Number - Brother Model MFC-5200C User Manual

Programming your pager number

When Paging is selected, your MFC dials the pager number you've
programmed, and then dials your Personal Identification Number
(PIN). This activates your pager so you will know that you have a fax
message in the memory.
1
Press Menu/Set, 2, 5, 1.
2
Press
shows PAGING? .
Press Menu/Set.
3
Enter your pager phone number
(up to 20 digits)
Followed by # #.
Press Menu/Set.
Do not include the area code if it is the same as that of your MFC.
For example, press 1 8 0 0 5 5 5 1 2 3 4 # #.
4
If your pager needs a PIN, enter the
PIN, press #, press Redial/Pause,
enter your MFC telephone number
followed by # #.
Press Menu/Set.
(For example, press 1 2 3 4 5 # Redial/Pause 1 8 0 0 5 2 1 2 8
4 6 # #)
OR
— —
If you do not need a PIN, press Redial/Pause, enter the fax
number of your MFC followed by # #.
Press Menu/Set.
(For example, press Redial/Pause 1 8 0 0 5 2 1 2 8 4 6 # #)
5
Press Stop/Exit.
You cannot change a Paging number or PIN remotely.
8 - 2 REMOTE FAX OPTIONS (NOT AVAILABLE FOR COLOR FAXES)
or until the LCD
REMOTE FAX OPT
1.FAX FWD/PAGING
FAX FWD/PAGING
PAGING?
PAGING
#:_
PIN
#:_