Table of Contents
Advertisement
2
If none of the users are hearing-impaired,
press
to select
or
to Step 4—OR—
If some or all of the users are hearing-impaired, select
and then press Menu/Set.
3
If all the users are hearing-impaired,
press
to select PERMANENT?,
or
and then press Menu/Set—OR—
If only some of the users are hearing-impaired, select TEMPORARY?, and
then press Menu/Set.
4
Press Stop/Exit.
Turning On Automatic Daylight Savings Time
You can set the machine to change automatically for Daylight Savings Time. It
will reset itself forward one hour in the Spring and backward one hour in the
Fall. Make sure you have set the correct day and time in the DATE/TIME
setting.
1
Press Menu/Set, 1, 6.
2
Press
to select
or
3
Press Stop/Exit.
Setting Tone/Pulse Dialing Mode
Your MFC comes set to accommodate tone dialing service
(multi-frequency). If you have pulse dialing service (rotary), you need to change
the dialing mode.
1
Press Menu/Set, 1, 7.
2
or
Press
to select
3
Press Stop/Exit.
Memory Storage
In the event of a power failure, all settings in the
RECEIVE,
SET AUTO
COPY, plus the
SETUP
SEND) are stored permanently. You may have to reset the date and
time.
5 - 7
I N I T I A L S E T U P
AMPLIFY:OFF?, and then press Menu/Set and go
VOL
(or OFF), and then press Menu/Set.
ON
(or TONE), and then press Menu/Set.
PULSE
DIAL,
SETUP
COVERPG SETUP
VOL
GENERAL
REPORTS,
REMOTE FAX
and
COVERPAGE MSG
AMPLIFY:ON?,
SETUP,
SETUP
OPT,
settings (from
Advertisement
Table of Contents
