Easy Receive; Printing A Reduced Incoming Fax (Auto Reduction) - Brother Model MFC-5200C User Manual

Easy Receive

When you use this feature, you don't have to press Fax Start when you
answer a fax call. Selecting ON allows the MFC to receive fax calls
automatically, even if you lift the handset of an extension or external
phone. When you see RECEIVING on the LCD or when you hear "chirps"
through the handset of an extension phone connected to another wall jack
(phone socket), just replace the handset and your MFC will do the rest.
Selecting OFF means you'll have to activate the MFC yourself by lifting the
handset of an external or extension phone, and then press Fax Start on
the MFC—OR—by pressing
Operation from extension telephones on page 5-5.)
If this feature is set to ON, but your MFC doesn't connect a fax
call when you lift a phone handset, press the Fax Receive code
5 1.
If you send faxes from a computer on the same phone line and
the MFC intercepts them, set Easy Receive to OFF.
1
Press Menu/Set, 2, 1, 3.
2
Use or
Press Menu/Set.
3
Press Stop/Exit.
Printing a reduced incoming fax
(Auto Reduction)
You can reduce the size of all incoming faxes to a fixed percentage,
regardless of the size of the paper in your MFC. ON lets your MFC
choose the level of reduction for you.
1
Press Menu/Set, 2, 1, 5.
2
Use or
OFF ).
Press Menu/Set.
3
Press Stop/Exit.
If incoming faxes show that the left and right margins have been
cut off, make sure this Auto Reduction feature is ON .
5 - 4 SETUP RECEIVE
5 1 if you are not at your MFC. (See
to select ON (or OFF ).
to select ON (or
SETUP RECEIVE
3.EASY RECEIVE
SETUP RECEIVE
5.AUTO REDUCTION