Changing The Remote Codes; Printing A Fax From The Memory - Brother Model MFC-5200C User Manual

Changing the remote codes

Remote Codes might not work with some telephone systems. The
preset Fax Receive Code is
Code is # 51.
If you are always disconnected when accessing your external
TAD remotely, try changing the Fax Receive Code and
Telephone Answer Code to another three-digit code (such as #
# #).
1
Press Menu/Set, 2, 1, 4.
2
Press or
Press Menu/Set.
3
If you want to, enter a new Fax Receive Code.
Press Menu/Set.
4
If you want to, enter a new Telephone Answer Code.
Press Menu/Set.
5
Press Stop/Exit.

Printing a fax from the memory

If you set Fax Storage to ON for Remote Retrieval, you can still print
a fax from the memory when you are at your MFC. (See Setting Fax
Storage on page 8-3.)
1
Press Menu/Set, 2, 5, 4.
2
Press Fax Start.
3
After printing has finished.
Press Stop/Exit.
5 - 6 SETUP RECEIVE
51. The preset Telephone Answer
to select ON (or OFF ).
SETUP RECEIVE
4.REMOTE CODE
REMOTE FAX OPT
4.PRINT FAX