Pause; Fax Redial; Tone Or Pulse - Brother Model MFC-5200C User Manual

Pause

Press Redial/Pause to insert a 3.5-second pause between numbers.
If you are dialing overseas, you can press Redial/Pause as many
times as needed to increase the length of the pause.

Fax Redial

If you're sending a fax manually and the line is busy, press
Redial/Pause to try again. Anytime you want to make a second call
to the last number you dialed, press Redial/Pause to save time.
If you're sending a fax automatically and the line is busy, the MFC
will automatically redial one time five minutes after the transmission.

Tone or Pulse

If you have a Pulse dialing service, but need to send Tone signals
(for example, for telephone banking), follow the instructions below. If
you have Touch Tone service, you will not need this feature to send
tone signals.
1
Lift the handset of an external phone.
2
Press #. Any digits dialed after this will send tone signals.
3
When you hang up, the MFC will return to the Pulse dialing service.
7 - 7 AUTO DIAL NUMBERS AND DIALING OPTIONS