Brother Model MFC-5200C User Manual page 246

Your telephone company may make changes to its facilities,
equipment, operations or procedures that could affect the proper
functioning of your equipment. If they do, you will be notified in
advance to give you an opportunity to maintain uninterrupted
telephone service.
If you experience trouble with your MFC-5200C, please contact a
Brother Authorized Service Center for information on obtaining
service or repair. The telephone company may ask that you
disconnect this equipment from the line until the problem has been
corrected or until you are sure that the equipment is not
malfunctioning.
If you are not able to solve a problem with your MFC, contact Brother
Customer Service. (See Brother numbers, page i.)
WARNING
For protection against the risk of electrical shock, always disconnect
all cables from the wall outlet before servicing, modifying or installing
the equipment.
This equipment may not be used on coin service lines provided by
the telephone company or connected to party lines.
Brother cannot accept any financial or other responsibilities that may
be the result of your use of this information, including direct, special
or consequential damages. There are no warranties extended or
granted by this document.
WARNING
Important—About the interface cable
This machine has been certified to comply with FCC standards,
which are applied to the USA only. The filter core supplied with your
MFC should be attached to the shielded interface cable according to
FCC 15, 27 (a). In addition, a grounded plug should be plugged into
a grounded AC outlet after checking the rating of the local power
supply for the printer to operate properly and safely.
IMPORTANT INFORMATION 20 - 2