Turning On Automatic Daylight Savings Time; Toner Save; Sleep Time - Brother FAX-2920 User Manual

Turning on Automatic
Daylight Savings Time
You can set the machine to change
automatically for Daylight Savings Time. It
will reset itself forward one hour in the Spring
and backward one hour in the Autumn. Make
sure you have set the correct date and time in
the Date/Time setting.
1
Press Menu/Set, 1, 5.
5.Auto Daylight
2
Press ▲ or ▼ to select On (or Off ).
Press Menu/Set.
3
Press Stop/Exit.

Toner Save

You can conserve toner using this feature.
When you set Toner Save to On , print
appears lighter. The default setting is Off .
1
Press Menu/Set, 1, 6, 1.
1.Toner Save
2
Press ▲ or ▼ to select On (or Off ).
Press Menu/Set.
3
Press Stop/Exit.

Sleep Time

Setting the Sleep Time reduces power
consumption by turning off the fuser inside
the machine while it is idle. You can choose
how long the machine is idle (from 00 to 99
minutes) before it goes into sleep mode. The
timer is automatically reset when the machine
receives a Fax or PC data* (*MFC-7225N
only) or makes a copy. The factory setting is
05 minutes. While the machine is in sleep
mode you will see Sleep on the LCD. If you
try to print or copy in sleep mode, there will be
a short delay while the fuser warms up to its
working temperature.
1
Press Menu/Set, 1, 6, 2.
2.Sleep Time
2
Use the dial pad to enter the length of
time the machine is idle before it goes
into sleep mode (00 to 99).
Press Menu/Set.
3
Press Stop/Exit.
Note
■
If you want to turn off sleep mode, press
Start and Options simultaneously in Step
2.
■
If the machine is in sleep mode when you
change the Sleep Time, the new setting
will take effect the next time the machine
copies, prints or is turned off and on.
Getting started
2
2 - 7