Setting The Fax Activity Report Interval - Brother Model MFC-5200C User Manual

Setting the Fax Activity Report Interval

You can set the MFC to print activity reports at specific intervals (every
50 faxes, 6, 12 or 24 hours, 2 or 7 days). If you set the interval to OFF ,
you can print the report by following the Steps on the next page.
The default setting is EVERY 50 FAXES .
1
Press Menu/Set, 2, 4, 2.
2
Press
interval. Press Menu/Set.
(If you choose 7 days, the LCD will ask
you to choose a day on which to begin the 7-day countdown.)
3
Enter the time to begin printing in 24-hour format.
Press Menu/Set. (For example: enter 19:45 for 7:45 PM.)
4
Press Stop/Exit.
If you select 6, 12, 24 hours, 2 or 7 days, the machine will print
the Activity Report when the MFC has stored 200 jobs. Even if
the time you selected has not passed yet, the MFC will print the
report because the memory is full then all the reported jobs will
be erased from the machine's memory.
When the MFC prints the activity report at any of the intervals
you selected, all the reported jobs will be erased from the
machine's memory.
9 - 2 PRINTING REPORTS
or to choose an
SETUP REPORTS
2.ACT.INTERVAL
ACT.INTERVAL
EVERY 50 FAXES