Remote Commands - Brother Model MFC-5200C User Manual

Remote commands

Follow the commands below to access features when you are away
from the machine. When you call the MFC and enter your Remote
Access Code (159
you must enter a remote command.
Remote commands
95 Change the Fax Forwarding
or Paging settings
1 OFF
2 Fax Forwarding
3 Paging
4 Fax Forwarding number
6 Fax Storage ON
7 Fax Storage OFF
96 Retrieve a fax
2 Retrieve all faxes
3 Erase faxes from the
memory
97 Check the Receiving Status
1 Fax
98 Change the Receive Mode
1 EXTERNAL TAD
2 FAX/TEL
3 FAX ONLY
90 Exit
REMOTE FAX OPTIONS (NOT AVAILABLE FOR COLOR FAXES) 8 - 5
), the system will give you two short beeps and
If you hear one long beep, the change has
been accepted. If you hear three short
beeps, you cannot change it because the
conditions have not been met. You can
register your Fax Forwarding number by
entering 4. Fax Forwarding number (see
page 8-6). Once you have registered the
number, the MFC will change to FAX
FWD:ON mode.
You can turn FAX STORAGE to ON or OFF.
Enter the number of a remote fax machine to
receive stored fax message(s). (See page
8-6.)
If you hear one long beep, you can erase fax
messages from the memory.
You can check whether your MFC has received
any faxes. If it has, you will hear one long beep.
If it hasn't, you will hear three short beeps.
If you hear one long beep, you can change
the Receive Mode.
If you hear three short beeps, you cannot
change it.
After a long beep, you can exit Remote
Retrieval.
Operation details