Setting The Ring Volume - Brother Model MFC-5200C User Manual

The Telephone Consumer Protection Act of 1991
makes it unlawful for any person to use a computer or
electronic device to send any message via a telephone
fax machine unless such messages clearly contain, in
a margin at the top or bottom of each transmitted page,
or on the first page of the transmission, the date and
time it is sent and an identification of the business or
other entity or other individual sending the message
and the telephone number of the sending machines or
such business, other entity or individual.
In order to program this information into your fax
machine, complete the steps described on page 4-3.
If you do not enter a fax number, you cannot enter any more
information.

Setting the Ring Volume

1
Press Menu/Set, 1, 5, 1.
2
Press
(OFF, LOW, MED, or HIGH).
Press Menu/Set.
3
Press Stop/Exit.
OR
— —
You can adjust the ring volume when your MFC is idle (not being
used). You can turn the ring OFF or you can select the ring volume
level.
Press or
key, the MFC will ring so you can hear the active setting as the LCD
shows it. The volume changes with each key press. The new setting
will stay until you change it again.
4 - 5 INITIAL SETUP
NOTICE
or to select
to adjust the volume level. Every time you press a
VOLUME
1.RING