Initial Setup; Getting Started; Setting The Paper Type - Brother Model MFC-5200C User Manual

4

Initial setup

4

Getting started

Setting the Paper Type

Set the MFC for the type of paper you are using.
1
Press Menu/Set, 1, 1.
2
Press or
INK JET , GLOSSY or TRNSPARENCY .
Press Menu/Set.
3
If you selected GLOSSY ,
GLOSSY:4-COLOR or GLOSSY:3-COLOR .
Press Menu/Set.
The print quality of black ink varies depending on the kind of
glossy paper you are using. Black ink is used when you select
GLOSSY:4-COLOR . If the glossy paper you are using repels the
black ink, select GLOSSY:3-COLOR , which simulates black ink
by combining the three ink colors.
4
Press Stop/Exit.
The MFC ejects paper with printed surfaces face up onto the paper
tray in the front of the MFC. When you use transparencies, remove
each sheet immediately to prevent smudging or paper jams.
4 - 1 INITIAL SETUP
to select PLAIN ,
or
GENERAL SETUP
1.PAPER TYPE
press to select