I/O Modules Page; Adam Page; Inputs Page; Relays Page - Bosch LTC-1311-20 Configuration Manual

Bosch Video Management System
Stop bits
Displays the time between each character being transmitted (where time is measured in bits).
Parity
Displays the type of error checking you want to use for the selected port.
Port type
Displays the connection type that is used to connect the CCTV keyboard with the workstation.
17.20

I/O Modules page

Main window >
Allows you to add or configure an I/O module.
Currently only ADAM devices are supported.
17.20.1

ADAM page

Main window >
Displays information on the selected ADAM device.
Allows you to change the display name of an ADAM device.
ADAM type:
Select the appropriate device type.
Inputs total:
Displays the total number of inputs available with this device type.
Relays/Outputs total:
Displays the total number of relays available with this device type.
17.20.2

Inputs page

Main window >
Allows you to change the display names of the inputs of the selected ADAM device.
Number
Displays the logical number of the input.
Name
Click a cell to change the display name of an input.
17.20.3

Relays page

Main window >
Allows you to change the display names of the relays of the selected ADAM device.
Number
Click a cell to change the logical number of a relay.
Name
Type the display name of the relay.
Bosch Sicherheitssysteme GmbH
Devices > Expand >
Devices > Expand >
Devices > Expand >
Devices > Expand >
Configuration Manual
Devices page | en 105
> > ADAM tab
> > Inputs tab
> > Relays tab
Configuration Client | V3 | 2010.07