Configuring Various Priorities; Configuring Camera Permissions; Configuring Decoder Permissions; Configuring User Interface Settings - Bosch LTC-1311-20 Configuration Manual

72 en | Configuring user groups
13.11

Configuring various priorities

Main window >
You can configure the following priorities:
–
–
–
To configure:
1.
2.
3.
4.
5.
13.12

Configuring camera permissions

Main window >
You can configure various permissions for cameras, e.g. PTZ control.
You cannot change these settings for a default user group.
To configure camera permissions:
1.
2.
3.
For detailed information on the various fields, see the Online Help for the appropriate
application window.
13.13

Configuring decoder permissions

Main window >
You can configure permissions for decoders.
You cannot change these settings for a default user group.
To configure decoder permissions:
1.
2.
3.
13.14

Configuring user interface settings

Main window >
You can configure a multi monitor mode with up to 4 monitors. You set for every monitor what
is displayed on it, e.g. monitor 2 only displays Live Image panes.
To configure user interface settings:
1.
2.
Configuration Client | V3 | 2010.07
User Groups
You can configure the priorities for acquiring PTZ controls and Bosch Allegiant trunk lines.
You can configure the alarm priorities for Live Mode and Playback Mode.
You can configure a time period for PTZ locking, i.e. a user with higher priority can take
over the camera control from a user with a lower priority and locks it for this time period.
In the User Groups tree, select a user group.
In the Control Priorities field, move the slider for as required.
In the Automatic Popup Behavior field, move the slider as required.
Click the User Interface tab.
In the Timeout in min. list, select the required entry.
User Groups
In the User Groups tree, select a user group.
Click the Priorities tab.
Select or clear the check boxes as appropriate.
User Groups
In the User Groups tree, select a user group.
Click the Camera Permissions tab.
Select or clear the check boxes as appropriate.
User Groups
In the User Groups tree, select a user group.
Click the Decoder Permissions tab.
Configuration Manual
Bosch Video Management System
Bosch Sicherheitssysteme GmbH