Configuring An Encoder / Decoder; Configuring A Decoder For Use With A Cctv Keyboard - Bosch LTC-1311-20 Configuration Manual

26 en | Configuring devices
5.
NOTICE!
You can also perform a scan for ADAM devices (Scan for ADAMs). The IP addresses of the
devices are detected. If available the device type is preselected. You must confirm this
selection.
To add an Allegiant CCL emulation:
1.
2.
3.
6.4

Configuring an encoder / decoder

To configure an encoder:
Main window >
or
Main window >
or
Main window >
To configure a decoder:
Main window >
To configure an encoder or a decoder:

See the Online Help for the
NOTICE!
IP devices can be connected that do not have all configuration pages that are described here.
6.5

Configuring a decoder for use with a CCTV keyboard

Main window >
Perform the following steps to configure a VIP XD decoder that is connected to a CCTV
keyboard.
To configure a decoder:
1.
2.
Configuration Client | V3 | 2010.07
Click the Name tab to change the display names of the Relays if required.
Expand , click .
The Allegiant CCL Emulation tab is displayed.
Click to check Enable Allegiant CCL Emulation.
Make the required settings.
The Allegiant CCL emulation service is started on the Central Server.
Devices > Expand
Devices > Expand
Devices >
Devices > Expand
Make the appropriate settings on the tab pages of the encoder or decoder.
Devices > Expand
Click the appropriate decoder which is used for connecting a CCTV keyboard.
Click the Periphery tab.
Configuration Manual
> Expand
> Expand
>
> Expand
pages for details.
> Expand
Bosch Video Management System
> Expand >
>
>
Bosch Sicherheitssysteme GmbH