Configuring The Language Of Operator Client; Adding A New License - Bosch LTC-1311-20 Configuration Manual

Bosch Video Management System
To configure the language:
1.
2.
3.
5.8

Configuring the language of Operator Client

You configure the language of your Operator Client independently of the language of your
Windows installation and of your Configuration Client. This step is performed in the
Configuration Client.
To configure the language:
1.
2.
3.
4.
5.9

Adding a new license

Main window
Have the Activation Letter at hand that you received from Bosch.
To add a new license:
1.
2.
3.
4.
5.
6.
Bosch Sicherheitssysteme GmbH
On the Settings menu, click Options....
The Options dialog box is displayed.
In the Language of the Configuration Client: list, select the desired language.
If you select Default system language, the language of your Windows installation is used.
Click OK.
The language is switched after the next restart of the application.
Click User Groups >
In the Language: list, select the desired language.
Click to save the settings.
Click to activate the configuration.
Restart Operator Client.
On the Tools menu, click License Manager....
The License Manager dialog box is displayed.
Select the software package that you want to activate.
Click Activate.
The License Activation dialog box is displayed.
Type the License Activation Key that you find in the Activation Letter.
Click Activate.
The software package is activated.
Repeat this procedure for each software package that you want to activate.
Configuration Manual
. Click the User Group Properties tab.
Getting started | en
Configuration Client | V3 | 2010.07
19