Main Settings > Date/Time Page; Dst Dialog Dialog Box; Advanced Settings > Video Input Page; Camera Name - Bosch LTC-1311-20 Configuration Manual

112 en | Encoders / Decoders page
Hardware version
Displays the version of the hardware.
Firmware version
Displays the version of the firmware.
Error code
Displays a number if a storage device is no longer available for recordings, for example due to
a technical defect.
Click Reset, to check whether the error still exists after a reset of the device. If the error still
exist, note the number and inform the Technical Support.
18.2 Main Settings > Date/Time page
If there are multiple units operating in your system or network, it is necessary to synchronize
their internal clocks.
Device date format / Device date / Device time
If there are multiple devices operating in your system or network, it is important to
synchronize their internal clocks. For example, it is only possible to identify and correctly
evaluate simultaneous recordings when all devices are operating on the same time.
Synchr. PC
Click to apply the system time from your computer to the device.
Device time zone
Select your time zone from the list.
Details
Click to display the DST Dialog dialog box.
Time server IP address
Set by Bosch VMS Central Server.
Time server type
Set by Bosch VMS Central Server. Default setting is SNTP.
18.2.1

DST Dialog dialog box

Date/Time page > Details
Generate
Set by Bosch VMS Central Server.
Delete
Set by Bosch VMS Central Server.
Day / Month / Year / Hour / Minute / Offset
Set by Bosch VMS Central Server.
18.3 Advanced Settings > Video input page
18.3.1

Camera name

Camera
Type the name of the camera. Ensure that Camera 1 is allocated to Video Input 1, Camera 2 to
Video Input 2, etc.
Configuration Client | V3 | 2010.07 Configuration Manual
Bosch Video Management System
Bosch Sicherheitssysteme GmbH