Dyndns; Network > Advanced Page; Snmp; 124 - Bosch LTC-1311-20 Configuration Manual

Video management system
Hide thumbs Also See for LTC-1311-20:
Table of Contents

Advertisement

124 en | Encoders / Decoders page
The maximum segment size for a connection to the iSCSI system can be higher than for the
other data traffic via the network. The size depends on the network structure. A higher value
is only useful if the iSCSI system is located in the same subnet as the device.
18.13.2

DynDNS

Allows you to use the Dynamic DNS network service, provided that a DynDNS.org account
exists and the registration of the host name of the device.
Enable DynDNS
Select On to enable Dynamic DNS.
Host name
Type the host name. Use the host name listed in DynDNS.org.
User name
Type the user name. Use the user name listed in DynDNS.org.
Password
Type the password. Use the password listed in DynDNS.org.
Status
Displays the status of the DynDNS function.
18.14
Network > Advanced page
18.14.1

SNMP

The device supports the SNMP V2 (Simple Network Management Protocol) for managing and
monitoring network components, and can send SNMP messages (traps) to IP addresses. The
device supports SNMP MIB II in the unified code.
SNMP
Select On to activate the SNMP function.
1. SNMP host address / 2. SNMP host address
Type the IP addresses of one or two target units. The device (e.g. encoder, camera) sends
SNMP traps automatically to the target units.
If you do not enter IP addresses, the device only replies to SNMP requests and does not send
SNMP traps to the target units.
SNMP traps
Allows you to select which traps the device sends to the target units. To do this, click Select.
Select
Click Select. The SNMP traps dialog box is displayed.
SNMP traps dialog box
Select the check boxes of the appropriate traps, and then click OK.
18.14.2
802.1x
IEEE 802.1x allows you to communicate with the device if a RADIUS server is used in a
network.
Authentication
Select On to activate 802.1x.
Identity
Type the user name that the RADIUS server uses for identifying the device.
Configuration Client | V3 | 2010.07
Configuration Manual
Bosch Video Management System
Bosch Sicherheitssysteme GmbH

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents