Detecting Vrm Devices, Live Only And Local Storage Encoders, Vidos Nvrs - Bosch LTC-1311-20 Configuration Manual

22 en | Configuring devices
To scan the network:
1.
2.
3.
4.
5.
6.
6.2 Detecting VRM devices, live only and local storage encoders,
VIDOS NVRs
Main window >
dialog box
You scan the network to detect the following devices:
–
–
–
–
You scan for each device group separately. Just right-click the appropriate item in the Device
Tree, for example right-click VRM Devices and click Scan VRM Devices.
To scan VRM devices:
1.
2.
3.
Configuration Client | V3 | 2010.07
Click .
The Network Scan dialog box is displayed and all available NVRs, decoders, and
encoders are detected.
The detected decoders are listed in the Decoders list and assigned automatically to the
tree item of the Device Tree. If no analog monitor group has already been created,
the detected decoders are added to a new analog monitor group under
If you do not want to use a decoder or an NVR, remove the item manually: right-click the
item and click Remove.
The detected NVRs are assigned automatically to the
In the Unassigned Encoders list, select an encoder and drag it to an NVR in the Assigned
Encoders and NVRs list. The encoder's cameras are recorded on the selected NVR.
Repeat the above step for every detected encoder that you want to be part of your
system. Encoders that you do not drag to an NVR, are completely invisible in Bosch Video
Management System.
Click Next >.
If required, a dialog box is displayed for changing the device names of the connected
devices of the detected IP devices to be used for display. Bosch Video Management
System names the devices with default names. If desired, you can use the existing names
of the devices.
Make the required settings. For changing the displayed device names of a complete
column at once, right-click a column with check boxes and click Select Column.
Click Finish.
Devices >
VRMs
iSCSI devices: you add them manually.
Live only and local storage encoders
VIDOS NVRs
Select the desired check boxes for the device types that you want to integrate.
Click Next >>.
Select the desired check boxes for the VRM devices that you want to integrate.
Click Next >>.
Click Add iSCSI device.
The Add iSCSI Device dialog box is displayed.
Configuration Manual
tree item of the Device Tree.
VRM & iSCSI Devices Scan > Bosch VMS Scan Wizard
Bosch Video Management System
> .
Bosch Sicherheitssysteme GmbH