Assigned Nvrs Page; Assigned Nvr Page; Add Network Path Dialog Box - Bosch LTC-1311-20 Configuration Manual

Bosch Video Management System
17.8.4

Assigned NVRs page

Main window >
Displays the Primary NVRs in your system and their assignment to the selected Failover NVR.
Allows you to assign or un-assign the available NVRs as required.
Remove NVR
Click to move the selected Primary NVRs to the Time [h] column.
Export on
Displays all Primary NVRs that are assigned to the selected Failover NVR.
Add NVR
Click to move the selected Primary NVRs to the Export on column.
Time [h]
Displays all Primary NVRs that are not assigned to the selected Failover NVR.
17.8.5

Assigned NVR page

Main window >
Displays the Primary NVRs in your system and their assignment to the selected Redundant
NVR.
Allows you to assign or un-assign the available NVRs as required.
Click left to the Primary NVR name to configure this Primary NVR to be mirrored by the
selected Redundant NVR.
Backup
Click to use the same camera storage settings as the Primary NVR. If you clear, the Camera
Storage tab becomes active and you can configure specific camera storage settings for this
Redundant NVR.
17.8.6

Add Network Path dialog box

Main window >
Network Path button
Allows you to add a network path as storage location.
UNC path (e.g. \\VideoStorage2\NVR4)
Type a network path. Use the syntax required for UNC paths:
\\<computer_name>\<directory>
...
Click to display a dialog box for selecting a network path.
Logon necessary
Select the check box if the network path is protected by a user ID.
User name
Type the required user name.
Password
Type the required password.
Bosch Sicherheitssysteme GmbH
Devices > Expand > Expand
Devices > Expand > Expand
Devices > Expand > Expand
Configuration Manual
Devices page | en
> > Assigned NVRs tab
> > Assigned NVR tab
> > Disk Storage tab > Add
Configuration Client | V3 | 2010.07
91