Configuring Devices - Bosch LTC-1311-20 Configuration Manual

20 en | Configuring devices
6

Configuring devices

Main window >
This chapter provides information on how to configure the devices in your system.
Changing the Device Tree impacts other pages of the Configuration Client:
–
–
–
–
You can configure the following devices:
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–



Follow these references to get detailed information on the available application windows:
–
–
–
–
–
–
–
Configuration Client | V3 | 2010.07
Devices
Maps and Structure
With the devices of the Device Tree you create a user defined structure called Logical
Tree. Hence, if you remove a device from the Device Tree, this device is automatically
removed from the Logical Tree. But adding a device to the Device Tree does not add this
device to the Logical Tree.
Cameras and Recording
All cameras of the Device Tree are available in the Camera Table and the Recording
Tables. You cannot modify DiBos or Bosch Allegiant cameras.
Events
All devices of the Device Tree are available in the corresponding Event Tables.
User Groups
You can reduce the functional range of the devices on several permission pages (per user
group).
Primary NVR and Failover NVR
Encoders
Encoders with local storage or live only
Decoders
DiBos systems
Analog matrices
Workstations
Communication devices
ATM and POS devices
Virtual inputs
I/O modules
Network monitoring system
CCTV keyboard
Analog monitor groups
Video Recording Manager devices
Click to save the settings.
Click to undo the last setting.
Click to activate the configuration.
Section 17.2 Network Scan dialog box, page 85
Section 17.4 Failover NVR Manager dialog box, page 87
Section 17.5 IP Device Configuration dialog box, page 87
Section 17.6 Set IP Addresses dialog box, page 87
Section 17.7 Set Display Names dialog box, page 88
Section 17.8 NVRs / Failover NVRs / Redundant NVRs page, page 88
Section 18 Encoders / Decoders page, page 111
Configuration Manual
Bosch Video Management System
Bosch Sicherheitssysteme GmbH