Configuring Events And Alarms; Copying And Pasting In Tables - Bosch LTC-1311-20 Configuration Manual

58 en | Configuring events and alarms
11

Configuring events and alarms

Main window >
or
Main window >
This chapter provides information on how to configure events and alarms in your system.
The available events are grouped beyond their corresponding devices.
In the Events page, you configure when an event in your Bosch Video Management System
triggers an alarm, executes a Command Script, and is logged. If an event is logged, it is also
displayed in the Event List of the Operator Client.
Example (part of an Event Configuration Table):
This example means:
If the video signal of the selected camera gets lost, an alarm is triggered, the event is logged,
and no script is executed. This only happens if the event lasts at least 500 ms.
In Alarms, you define how an alarm is displayed, and which cameras are displayed and
recorded in case of an alarm.
Some system events are configured as alarms by default.
Follow these references to get detailed information on the available application windows:
–
–
–
–
–
–



11.1

Copying and pasting in tables

You can configure many objects simultaneously within a Camera Table, an Event Configuration
Table, or an Alarm Configuration Table with a few clicks.
For detailed information, see Section 9.1 Copying and pasting in tables, page 48.
Configuration Client | V3 | 2010.07
Events
Alarms
Section 22.1 Command Script Editor dialog box, page 140
Section 22.2 Create Compound Event / Edit Compound Event dialog box, page 141
Section 22.3 Select Script Language dialog box, page 141
Section 23.1 Global Alarm Settings dialog box, page 142
Section 23.2 Select Image Pane Content dialog box, page 143
Section 23.4 Alarm Options dialog box, page 144
Click to save the settings.
Click to undo the last setting.
Click to activate the configuration.
Configuration Manual
Bosch Video Management System
Bosch Sicherheitssysteme GmbH