Select Image Pane Content Dialog Box - Bosch LTC-1311-20 Configuration Manual

Bosch Video Management System
Alarm Settings tab
Display order in case of same alarm priority:
Select the appropriate value to configure the order of Alarm Image panes in the Alarm Display
of the Operator Client.
Max. Image panes per alarm:
Enter the maximum count of Alarm Image panes to be displayed in case of an alarm.
Auto-clear time:
Enter the number of seconds until an alarm is automatically cleared.
This only applies for alarms that are set to Auto-clear in the Alarms page.
Instant playback rewind time:
Enter the number of seconds for the duration of instant playback.
Manual alarm recording time:
Only valid for NVR recordings.
Enter the number of minutes for the duration of alarm recording that a user can start manually
in the Operator Client.
The user can stop the manual recording before this time is elapsed.
Repeat alarm audio:
Select the check box and enter the number of seconds after an alarm sound is repeated.
Interrupt the Windows Screen Saver for incoming alarms
Select the check box to ensure that an incoming alarm is displayed even when the screen
saver is active. If the screen saver requires a user name and password for being interrupted,
this setting has no effect.
Analog Monitor Groups tab
Show blank screen
Click to configure that on a monitor not being used for alarm display nothing is shown.
Continue live display
Click to configure that on a monitor not being used for alarm display live display is shown.
23.2

Select Image Pane Content dialog box

Main window >
the 1-5 columns
Allows you to select the Logical tree item that is displayed and recorded (if the item is a
camera) in case of the selected alarm.
NOTICE!
A map displayed in an Alarm Image pane is optimized for display and contains only the initial
view of the basic .dwf file.
Search Item
Enter text to find an item in the Logical Tree.
Find
Click to find the camera with the entered search text in its description.
Bosch Sicherheitssysteme GmbH
Alarms > or > Alarm Image Panes column > Click ... in one of
Configuration Manual
Alarms page | en 143
Configuration Client | V3 | 2010.07