6.1
Introduction
The POC-127 is supported with a system integrated touch panel. SAW and Resistive
touch screen types can be chosen. SAW type was controlled by system COM5, and
Resistive Touch Sensor was linked to system COM6.
Caution! Please don't install both SAW Touch driver and Resistive Touch driver
at same system. Only install one touch driver base on your hardware
configuration.
6.1.1
SAW Touch Controller
Elo Touch 2701 control board (Elo Part Number D68054-000)
6.1.2
Resistive Touch Controller
Build-in Resistive Touch Controller on Mother Board (EETI number: ETP-CP-S5XR)
6.2
Installation of Touch Screen Driver
6.2.1
Installation for touch screen driver
Step
1.Double Click "Setup.exe" in D:\Driver\XP\Touch folder. The Install dialog will
appear.
Step
2.Click Next to continue.
POC-127 User Manual
38