Installation Process; Checking The Nitrogen Pressure - Huawei NetCol5000-C030 User Manual

NetCol5000-C(030, 032, 065) In-row Chilled Water
Smart Cooling Product
User Manual

3.3 Installation Process

Remove the protective plastic bag from the cabinet only immediately before
installation. Do not remove the bag during equipment room renovation or
infrastructure construction; otherwise, dust may enter the cabinet and affect the
internal components.
Figure 3-15 Installation flowchart

3.4 Checking the Nitrogen Pressure

Context
●
●
Procedure
Step 1 Open the door lock using a key, and open the cabinet rear door.
Issue 04 (2021-03-15)
NO TICE
The device has been injected with 0.2–0.6 MPa nitrogen before delivery. Check
the nitrogen pressure for nitrogen leakage.
You can open or close the exhaust valve using a flat-head screwdriver.
Copyright © Huawei Technologies Co., Ltd.
3 Installation
45