How Do I Query Logs; How Do I Query Component Status - Huawei NetCol5000-C030 User Manual

NetCol5000-C(030, 032, 065) In-row Chilled Water
Smart Cooling Product
User Manual
----End

7.1.2 How Do I Query Logs?

Context
The Query Logs screen displays the operations performed by the user.
Procedure
Step 1 On the home screen, choose Maint > Query Logs.
Figure 7-2 Log query
----End

7.1.3 How Do I Query Component Status?

Context
You can query component status in the following two ways.
Issue 04 (2021-03-15)
NO TE
● The temperature curve (upper) and the humidity curve (lower) are displayed on the
same screen. The abscissa shows time. The temperature set point is the midpoint
temperature on the upper ordinate while the humidity set point is the midpoint
humidity on the lower ordinate.
● The temperature and humidity curves show the current average temperature and
humidity of the control type.
● You can tap and
humidity ordinate. The midpoint temperature is the temperature set point and the
midpoint humidity is the humidity set point after the ordinate range is zoomed in or
out.
● The temperature display range is from ±3°C to ±30°C of the temperature setpoint.
● The humidity display range is from ±5% to ±50% of the humidity setpoint. The
displayed value varies according to smart cooling products. The actual displayed value
prevails.
Copyright © Huawei Technologies Co., Ltd.
to zoom in or out the range of the temperature and
Figure 7-2
7 FAQ
is displayed.
176