NetCol5000-C(030, 032, 065) In-row Chilled Water
Smart Cooling Product
User Manual
6.4.6 Replacing a T/H Sensor
Prerequisites
●
●
Context
Preparation: Maintain from the rear door.
Procedure
Step 1 Tap Shutdown on the home screen of the display module.
Exercise caution because the device is still energized after it is shut down on the
screen of the display module.
Step 2 Open the rear door and remove the air filter.
Step 3 Remove the cable terminals from the T/H sensor.
Step 4 Pull out the T/H sensor upwards.
Figure 6-9 Removing a T/H sensor (NetCol5000-C065)
Issue 04 (2021-03-15)
A T/H sensor needs to be replaced.
A spare T/H sensor of the same model is available and functional.
NO TICE
Copyright © Huawei Technologies Co., Ltd.
6 System Operation and Maintenance
162