Huawei NetCol5000-C030 User Manual page 117

NetCol5000-C(030, 032, 065) In-row Chilled Water
Smart Cooling Product
User Manual
Step 7 Set SNMP trap parameters.
1.
2.
3.
4.
5.
----End
Follow-up Procedure
After a USB flash drive has been inserted into the USB port of the main control
board and successfully identified, tap Export File under MIB File to export the
MIB file to the USB flash drive for the customer's use in accessing a third-party
NMS.
Before using a USB flash drive, ensure that its data has been scanned by antivirus
software and is secure.
Figure 4-16 Exporting the MIB file successfully
Issue 04 (2021-03-15)
Tap Add under SNMP Trap.
Set Trap Address as planned and Trap Port to the actual port number.
NO TE
Trap Port is set to null by default.
Select the SNMP Version. If an SNMPv3 user is configured, it is recommended
that SNMP Version be set to SNMPv3.
If SNMP Version is set to SNMPv3, select an SNMPv3 user name, and then
tap as shown in
Figure 4-15 Setting SNMP trap parameters
Tap Submit under SNMP Trap.
Figure 4-16 shows successful file export.
NO TICE
Copyright © Huawei Technologies Co., Ltd.
Figure 4-15.
4 Power-On Commissioning
109