Figure 94- Atx Power; Figure 95-Parallel Port - Rasilient ApplianceStor 50 User Manual

Advanced System Use & Maintenance
Use of a PSU with a higher power output is recommended when configuring a system
•
with more power-consuming devices. The system may become unstable or may not
boot up if the power is inadequate.
This motherboard supports ATX2.0 PSU or later version.
•
Ensure that your power supply unit (PSU) can provide at least the minimum power
•
required by your system.

Figure 94- ATX power

Parallel port connector (26-1 pin LPT1)
This connector is for a parallel port. Connect the parallel port module cable to this connector;
then install the module to a slot opening at the back of the system chassis.

Figure 95-Parallel port

System panel connector (20-pin PANEL1)
This connector supports several chassis-mounted functions.
User Manual
Rev. 1, November 2011
ApplianceStor
50 66