Table of Contents
Advertisement
Hardware Installation
Figure 40- RAID recovery
2. Use the up/down arrow keys to select the option you want, and then press <ENTER>. The SELECT
RECOVERY VOLUME screen appears.
Figure 41-Select recovery volume
3. Use the up/down arrow keys to select a drive, and then press <Space> to select. A small triangle marks
the selected drive. Press <Enter> after completing your selection and return to the utility main menu.
Exiting the Intel® Rapid Storage Technology utility
To exit the utility:
From the utility main menu, select 5. Exit, and then press <Enter>. The following warning message appears.
1.
Figure 42- Execute recovery volume
Press <Y> to exit or press <N> to return to the utility main menu.
2.
Rebuilding the RAID
This option is only for the RAID 1 set.
User Manual
Rev. 1, November 2011
ApplianceStor
50
33
Advertisement
Table of Contents
