Table of Contents
Advertisement
Hardware Installation
Figure 33- Create volume
9. Press <Y> to create the RAID volume and return to the main menu, or <N> to go back to the
CREATE VOLUME menu.
Creating a Recovery set
To create a recovery set:
1. From the utility main menu, select 1. Create RAID Volume and press
<Enter>. The following screen appears.
Figure 34- Create Recovery Set
2. Enter a name for the recovery set and press <Enter>.
3. When the RAID Level item is selected, press the up/down arrow keys to select Recovery, and then
press <Enter>.
4. When the Disks item is selected, press <Enter> to select the hard disk drives you want to include in
the recovery set. The SELECT DISKS screen appears.
Figure 35- Recovery set select disk
User Manual
Rev. 1, November 2011
ApplianceStor
50
30
Advertisement
Table of Contents
