Table of Contents
Advertisement
Hardware Installation
®
Intel
Rapid Storage Technology Option ROM Utility
®
The Intel
Rapid Storage Technology Option ROM utility allows you to create RAID 0, RAID 1,
RAID 10 (RAID 1+0), and RAID 5 set(s) from Serial ATA hard disk drives that are connected to
the Serial ATA connectors supported by the Southbridge.
®
To enter the Intel
Rapid Storage Technology option ROM utility:
1. Install all the Serial ATA hard disk drives.
2. Turn on the system.
3. During POST, press <Ctrl+l> to display the utility main menu.
Figure 30- RAID GUI
The navigation keys at the bottom of the screen allow you to move through the menus and select
the menu options.
The RAID BIOS setup screens shown in this section are for reference only and may not exactly
match the items on your screen.
Creating a RAID set
To create a RAID set:
1. From the utility main menu, select 1. Create RAID Volume
<Enter>. The following screen appears.
User Manual
Rev. 1, November 2011
1. Create RAID Volume
1. Create RAID Volume and press
1. Create RAID Volume
ApplianceStor
50
28
Advertisement
Table of Contents
