Table of Contents
Advertisement
Hardware Installation
Hardware Preparation and Installation
Installing friction rail kit items
Your friction rail kit package contains:
•
Two pairs of rack rails (for the rack)
•
Nut-and-bolt type screws and one pair of server latches
Figure 7- Rail Kit
Attaching the fixing latches to the server
Refer to the image below for the locations to attach the two fixing latches to the two sides of the server with four
screws.
Figure 8-Rail Latches
Attaching the rack rails
To attach the rack rails
Place the two front rail rack joints into the rear rail rack slots, as shown in the following figure.
1.
Attach the front and rear rail racks with eight screws and nuts, as shown in the following figure. Do not
2.
secure the screws too tight so that you can still adjust the length of the rack rails to meet the depth of the
server rack.
Figure 9- Rail assembly
User Manual
Rev. 1, November 2011
ApplianceStor
50
15
Advertisement
Table of Contents
