Figure 108- Smbios Event Log - Rasilient ApplianceStor 50 User Manual

Advanced System Use & Maintenance
Change Smbios Event Log Settings

Figure 108- Smbios event log

Smbios Event Log [Enabled]
Allows you to enable or disable all features of Smbios event logging. Configuration
option: [Disabled] [Enabled]
Erase Event Log [No]
Allows you to select the options for erasing Smbios event log. Configuration
options: [No] [Yes, Next reset] [Yes, Every reset]
When Log is Full [Do Nothing]
Allows you to select the options for reaction when the event logs are full. Configuration
options: [Do Nothing] [Erase Immediately]
MECI pod
Allows you to adjust value for the MECI (Multiple Event Count Increment),
which is the number of occurrences of a duplicate event that must pass before the
multiple-event counter associated with log entry is updated. Use the <+> and <-> keys to
adjust the value. The values range from 1 to 255.
METW pod
Allows you to adjust value for the METW (Multiple Event Time Window), which is the
number of minutes that must pass between duplicate log entries which utilize a
multiple-event counter. Use the <+> and <-> keys to adjust the value. The values range from 0
to 99.
Log OEM Codes [Enabled]
Allows you to enable or disable the logging of EFI status codes as OEM codes.
Configuration option: [Disabled] [Enabled]
User Manual
Rev. 1, November 2011
ApplianceStor
50 80